Starlink Ridgeline Mount – Everything You Need To Know

About Starlink Ridgeline Mount: While Starlink offers fast and reliable satellite internet, connectivity highly relies on dish positioning. 

Slower connections are mainly attributed to obstructions and minimal sky-view fields. 

Luckily, accessories like the Starlink Ridgeline Mount have made it easier to install the dish and find an optimal position with a clear sky view. 

Here, we thoroughly review the Starlink Ridgeline Mount Kit and its overall performance in dishes. 

What Is Starlink Ridgeline Mount?

Starlink Ridgeline Mount offers a solid solution to connectivity by installing the dish on any roof type, whether flat or pitched. 

The mount is made from sturdy aluminum materials finished in a sleek design. At the bottom of the mount is a rubber padding to provide grip and prevent the mount from flying away during strong weather conditions. It has a noticeable quality compared to aftermarket alternatives. 

The kit comes with everything needed during installation, which saves you a lot of time and money spent on extra accessories.

 The kit also comes directly from the Starlink warehouse, and shipping costs are already included in the price. 

Starlink Ridgeline Mount Kit Contents 

The Ridgeline kit contains several items, including: 

  • Foldable Mount 
  • Instruction manual 
  • Cable clips 
  • Carrying bag 
  • Four ballast weights 


  • Specially designed for Starlink dish 
  • Easy to install 
  • Quality and durable materials 
  • Adjustable to any roof type 
  • Non-penetrating type, no drilling required


  • A bit pricey, starting at $250 
  • Not yet rated for windy locations 
  • Does not have a mass extender for places with too many obstructions 

Where To Buy Starlink Ridgeline Mount?

Since the Starlink Ridgeline Mount kit is an official accessory from Starlink, it can be found on their website. However, alternative versions are available on third-party sellers like Amazon and eBay, which offer similar features. 

How to Install the Starlink Ridgeline Mount Kit?

Worker installing a satellite dish 

Worker installing a satellite dish. 

Before installing, you must ensure the dish is placed optimally without obstructions. Use the Starlink obstruction finder tool to check for a clear sky view and the best position. 

Once you’re sure of where to place the dish, follow the step-by-step guide to mount your satellite dish: 

Make A Wiring Plan

First, you’ll need to figure out the wire path from the Starlink satellite dish to your router. 

Since the connector is smaller from the inside, start by routing it from the router to the walls and the roof. 

Carry Ridgeline To The Roof

With the wiring in place, take the Starlink Ridgeline Mount to the roof and place it on the ridgeline, allowing both sides to sit perfectly flat. 

The support is light, and one person can carry it as they move. 

Align the Mounting Arm 

The mounting arm should face the same direction as the recommended position by the finder tool. Use the same angle and direction and screw the mount tightly to maintain the position. 

Bring in Ballast Weights

To ensure the ridgeline olds fit perfectly on the roof, you need four ballast weights with the kit. 

You can take them up the roof individually, as they measure a little over 13 pounds each. 

Once they’re all on the roof, attach the ballast mounts with the hooks at the base of the ridgeline mount. 

Route Starlink Cable

Once the ballast is in place, bring the Starlink cable wired inside the home. Ideally, it should be routed along the walls and down the fascia of your home’s roof. 

Use clips where necessary and ensure the cable does not hang from anywhere inside the house. 

Connect Starlink Dish

Woman looking for Starlink signal on phone 

Woman looking for Starlink signal on phone 

Now, plug the Starlink cable into the dish and place the dish on the mount’s guide piece until it makes a clicking sound. 

Once the dish is connected, check your router to see if it detects the Starlink dish and starts collecting obstruction data

You can leave the dish overnight to check for any new obstructions to ensure perfect positioning. 

It is essential to ensure you follow the right procedures during installation. 

For instance, the ballast weights should be evenly distributed to secure a firm grip on the mount with perfect resistance to wind and other external conditions. 

How Does Starlink Ridgeline Mount Compare to Alternatives?

Starlink dish on J-mount 

Starlink dish on J-mount 

Starlink Ridgeline mount is an excellent accessory for roof installations and provides the best dish positioning. 

However, it may not be suitable for all scenarios, and you may have to turn to alternatives such as: 

  • Starlink volcano roof mount: This mount is better suited for flat roofs. It comes packed with all you need for installation, including screws and cables. 
  • J-mount: This mount is a popular accessory for satellite dishes and has been used for several decades. They are quite common and inexpensive. The J-mount has a 1.5-inch wide pipe to connect to your Starlink dish. But since it’s not a stock accessory, you may have to make a few adjustments to fit the Starlink dish perfectly. 
  • Starlink Flashing mount: It is a flexible, easy-to-install roof mount, as you can place it on roof shingles to ensure a solid installation layer. You may need to add a pivot mount to secure the flashing mount tightly. 


Winding up, the Starlink Ridgeline Mount Kit offers the best solution to those looking for a non-penetrating roof mount for a Starlink dish.

 It has a sturdy build and a locking mechanism to keep the dish in place. 

Plus, it has everything ready for use, and you don’t need extra components during installation. 

Being one of the easiest mounts to install, you don’t have to worry about professional installation services that would cost more.