About Starlink Dimensions: Starlink is a global satellite internet provider with a massive subscriber list.
However, there are few accessories for Starlink products, and most people outsource mounts and covers.
For such DIY projects, knowing the dimensions is vital. Here, we’ll look at the dimensions of common Starlink accessories from the Starlink dish to the base.
Starlink Orbital Satellite Size
Starlink has launched over 60 satellites in the low earth orbit, moving in a linear formation.
Each satellite has a solar panel and several antennas connected in one flat panel.
They weigh a whopping 227kg, with the latest version weighing 1250 kg and 7m long.
Starlink Internet Dish Size
Starlink Round Dish Dimensions
The circular dishes were the first to roll out from Starlink in 2020.
Using the traditional satellite dish technology, they had a great reception, thanks to its 23-inch diameter and about 10 cm length.
Starlink Rectangular Dish Dimensions
After much thinking, Starlink changed its round dish designs to smaller rectangular versions.
The first one was released in November 2021 and measures 50 cm long and 30 cm wide.
Starlink RV Dimensions
The Starlink RV has the same dimensions as the regular rectangular dishes mentioned above.
Starlink High-Performance Dish Dimensions
Late in 2022, Starlink designed another High-Performance dish with better features than the previous one.
This dish is the current model and is flexible for commercial and home use. It measures 55 cm long by 50 cm wide.
Starlink Dish Mast Dimensions
The bottom part of the mast has a thinner circular layer with a diameter of 1.34 inches, while the top part is 1.50 inches.
The length of the Starlink mast up to the point it connects to the dish is 10.75 inches.
Starlink Base Dimensions
The Starlink base has an “X” shape, and in the rectangular dish versions, it measures 12.85 inches by 22 inches.
At the tip of the base are mounting holes, which have a center-to-center spacing of 21.5 inches on the longer side and 12.25 inches on the shorter side.
Each mounting hole has an oval-like shape measuring about 0.60 inches by 0.26 inches.
The center of the mounting base has an opening with a diameter of 1.35 inches.
Starlink Cable Size
The 15-50 meter Starlink cable has a 0.27-inch diameter with a thicker end measuring 0.6 inches.
For the whole cable to fit in a drill hole, you should use a ¾-inch diameter drill bit.
Starlink Router Dimensions
The Starlink standard router measures 2.5 inches x 10 inches x 7 inches. The same applies to the Starlink mesh node.
Shipping Box Size
Starlink shipping box
A Starlink shipping box that weighs around 23.2 pounds has the following dimensions: 24 inches x 10.5 inches x 14.25 inches.
Why Starlink Dish Matters?
Starlink’s dish dimensions are vital because they determine the performance and overall ability to capture signals from remote areas.
Let’s discuss more main reasons why the size of your Starlink dish is important:
DIY Use
While Starlink offers a solution to internet speeds and accessibility, you may have to install the hardware yourself.
Knowing the size of the dish and its dimensions will help you make the right measurements during installation.
Plus, you won’t mount a crooked dish or loosely-fit screws.
It’s vital to know all measurements, so we included every detail of the Starlink dish, including measures of holes and average drill sizes to use.
Compatibility
Starlink recommends different dish sizes for different regions due for the best performance results.
Such requirements often determine if you’ll get high-speed internet or just regular speeds.
That is why it is so critical to input the right home address while purchasing Starlink hardware.
So, always get the required dish specifications to get the optimal signals and best performance of your Starlink dish.
Also, look out for newer versions of the Starlink dish, as the company is constantly innovating and designing better satellite dishes.
Signal Strength
The size of your dish determines how well Starlink will get signals from satellite constellations.
Generally, larger dishes have a wider aperture and can collect weaker signals from miles away.
It is recommended to get a larger Starlink dish if you live in remote areas or generally areas with slow signals.
However, the newer version of Starlink dishes is much smaller than its predecessors.
It is better to contact Starlink and find out which size fits best for your region.
Troubleshooting
Connect to Starlink on the app
While most people don’t care about the measurements, knowing your Dish dimensions ensures you understand it better.
You can also understand whenever there is an issue with the signal or if it is not getting weak signals, even in a populated area.
In addition, it is crucial to understand your dish and its measurements when contacting customer support for help. It also helps whenever you have a professional installer around. It makes their work way more easier.
Conclusion
It is everything you need to know about Starlink hardware dimensions. When you have more details about the measurements, you can do a quick DIY installation and get better signals.
Plus, you’ll know how the size of a dish affects the quality of your internet coverage and signal strength.