There comes a time when you need to reset Starlink router. For instance, resetting is essential if you’re experiencing never-ending connectivity issues or a slow network.
The router is the cardinal device where you can manage all the connections. We’ll elaborate on the main steps in resetting all types of Starlink routers in detail.
How Do Starlink Routers Work?
The router receives a radio wave signal from the ISP’s computer’s/ distributing antenna. Next, the router converts this radio wave into an internet signal.
This signal can now be distributed to other devices within the router’s range.
From the above working principle, it’s apparent that a router is among the most critical components in internet distribution.
And that further means that most connectivity problems stem from the router.
Hence, resetting it to solve configuration problems and other issues is often needed.
Why Do You Need to Factory Reset Starlink Router?
A Wireless Router.
- If your network is unusually running slower than usual, it would help to reset the router. The adapter’s configuration has probably changed, so you’re probably experiencing the anomaly. Also, it could be a carrier’s gear problem. Whatever the issue is, a typical factory reset will sort it all.
- Don’t rush to reset the router when receiving a weak WiFi signal. The issue could be due to improper router placement, so first, you should locate the best spot to place it. If nothing works even after changing its positioning, the final resort would be resetting it.
- Thirdly, you must reset your router when you change the network configuration setting. It helps changes like a WiFi password and IP address upgrade to take effect.
- A router’s optimal performance depends on so many things. For instance, when it collects and stores so much temporary data, this may affect its performance. Also, there are settings that you can make on the router that can slow down connections. The solution to returning the router to the default settings is primarily resetting it.
- Finally, a factory reset solves software glitches that could be causing connectivity issues with your router.
Troubleshooting Tips Before Resetting Your Starlink Router
A Router in the Office.
A Starlink router reset will solve a lot of problems. But it also erases your settings; sometimes, you don’t even need to perform it.
Hence, it would help to check out the following troubleshooting tips when experiencing a slow connection.
Check the Cable Connections
Confirm that the router’s power cable is not loose and perfectly connects to the main socket.
Also, confirm that the cable from the Starlink antenna to the router is not loosely connected.
Loose connections and damage to connectors will affect the WiFi signal.
The solution is to replace these parts or repair those that are reparable.
Router Restart
A router restart will also solve most of the configuration problems. So try it first before embarking on a factory reset.
A restart simply means switching off the router and switching it back on.
Update Firmware
Using outdated firmware can cause router problems. Check for available updates and download them.
It should improve the device’s functionality.
How to Reset Starlink Router?
A Router Reset Button.
Before factory resetting your router, you should understand that the process will erase all your settings and passwords.
Also, the factory reset procedures differ slightly based on the specific router type.
This section will deal with the three main generic procedures for resetting all router types.
Using The Reset Button
It’s the quickest Starlink Router resetting option, as you achieve everything by simply pressing a button. Here are the steps:
- Your router must be connected to the power supply. So connect it to the power port, and it is vital to ensure that the power plug fits perfectly. A disconnection during the factory process means it won’t happen to completion.
- Now, find the reset button on the back of the router. Usually, it’s at the back, although the positioning varies from router to router.
- The reset button is concealed, so you will require a sharp object to press it. Use a needle and paper pin to press it. Press and hold the button for about ten seconds. The router lights will go off and then back on. It is confirmation that the factory resetting process is successful.
- Now, you can input the new settings onto your router.
Using The Web-Based Interface
If you cannot access the reset button, the alternative is resetting from the web platform.
- Connect the router to your laptop via an ethernet cable.
- Next, input this address on the browser search bar: 192.168.1.1, and press enter. You’ll now have access to the router’s login page.
- Enter your login credentials, and once you’re logged in, you can access the router settings.
- Locate the reset settings to initiate the process.
Reset Via App
The last reset option is via the Starlink app. Open the Starlink app and log in to your account.
Click ‘Router Settings’ from the menu and then select ‘Reset Router.’
How to Factory Reset the Original Standard Circular Dishy？
A router factory reset illustration.
The original circular dish router features a reset button on the bottom part of the component.
- To reset it, locate the button first, then press and hold for about 5 seconds. Release it when the adjacent blue light turns blue.
- Allow it to reboot, then connect to the WiFi to input your new router settings.
How to Factory Reset Starlink Mesh Router？
A Wireless Router.
A Starlink Mesh router’s resetting method is simple; you only need a simple power cycle to solve the problem.
- Disconnect the router from the power supply and let it stay unconnected for some period. Then, connect it back again. Repeat the connection and disconnection process at least four times.
- Next, open the Starlink app and click ‘pair-to-mesh.’ Now, you can link the mesh router, and if the power cycle is successful, you won’t experience connectivity issues.
Summary
Starlink routers face the problems you’d expect with all routers. Thus, factory resetting them is sometimes very important.
The resetting is quick, and you can do it all by yourself. So go ahead and reset it to restore its excellent performance.