About Mount Starlink on Pole: While Starlink is ideal for high areas and rooftops, obstructions may force you to look for a clear location.
That’s where the Mount Starlink on Pole comes in! It is an indispensable accessory that allows you to install your Stalrink dish in the open for maximum signals.
Read on as we explore what’s included in the Starlink pole mount kit, installation, and setup process.
Why do I need to buy a Starlink pole mount?
The Starlink pole mount is a perfect accessory mountable in open spaces to get strong signals.
If you need something for your RV, the Starlink Flag mount should be a great pick. The more forested the area, the longer the pole you’ll need.
A standard Starlink pole mount should be fine for places with minimal instructions.
What is included in the Pole Mount Kit For Starlink?
Tool kit on wood background
Regarding accessories, Starlinks has the best, and its official mount kit is way better than the aftermarket options.
However, if you have a location that’s open or needs unique mounting needs other than the stock mount, the aftermarket ones become an option.
The official Starlink pole mounting kit entails the following:
- U-bolt clamp
- A wrench
- Pole mount adapter
- Cable clips
The height of the pole dictates so much from the location to the size of the dish. While older mounts look sturdier, they don’t do well in most roof types.
The 1st generation pole weighs about 13 lbs, and the newest version is just under 9 lbs.
If you’re in a windy area, the 1st generation pole will help you withstand these conditions. You can add a DIY windbreaker for extra protection.
Remember, if the official mount doesn’t fit, you’ll dig deeper in your pockets to get other mounts. They’re a bit pricier and are not always available.
How to Install Mount Starlink on Pole?
Satellite dish on the roof
The installation process is a bit hands-on, and you should be able to set aside a few hours. We recommend you avoid installing the pole directly on the ground as you may have to move in the future.
Tools required
To get the Starlink mount pole steady, you’ll need a few accessories and equipment. Let’s explore the list:
- Water
- Concrete mix
- Shovel
- Bucket
- Gloves
- Level
- Mortar Hoe
Installation steps
The first step is to make a concrete mix to keep the pole in the ground.
There are several ways to make this mix, including using a cement mixer, in-hole mixing, buckets, or a wheelbarrow.
The most straightforward way is using 2 buckets, putting premixed concrete in each bucket, and adding water slowly.
Operator on a satellite dish
- Look for a location around your compound. The area must have a clear view for the satellites with enough space to rotate whenever it realigns to find the best signals. To ensure enough space, use the Starlink app to get the clearest view.
- Use an additional pole to lead the Starlink pole mount into the concrete.
- Dig a 2ft deep and 2 ft wide hole in the ground.
- Fix the helper pole right in the middle of the base and ensure it is level. You can use a torpedo level or a pole level.
- Pour the concrete mix into the base, keeping the helping pipe in place and in a vertical position.
- Use sticks or bricks to keep them in place and leave the concrete to cure for about 24 hours. If you use a fast-setting concrete, it should cure in at least 4 hours.
Once the base is firm and set, you can install the Starlink mount pole.
Follow these steps for the best results.
- Connect the top and bottom tubes, ensuring they are tightly and secure.
- Place the dish on the upper part of the pipe and make sure the cable passes through it. Use a mount adapter to secure the top part. We recommend starting with this step before mounting the dish to the ground.
- Now, put the bottom part of the tube into the base pipe. Check whether the pipe is secure by shaking it. If you feel surface movements on the concrete, leave it to rest for a few more hours.
- Take U-bolt clamps to bond the joint between the Starlink mount pipe bottom and the concrete base. Use a wrench to tighten this joint and ensure it is waterproof.
- Using proper paths, take the cable inside your home and connect it to the router.
- Perform a test and see if the connection is fast.
Are Lightning Protection Measures Used?
If you use your Starlink dish in a lightning-prone area, you might have to add extra lightning protection gear, such as a surge protector or a lightning rod.
If you intend to leave the Starlink dish in a lightning storm or plan to travel for a long time, it’s best to leave it unplugged.
Starlink does not cover instances like lightning, and you may incur steep costs. The warranty also does not cover damages due to:
Extended warranty concept in an office
- Fires, floods, and electrical charges
- Abuse, misuse, or alterations
- Neglected or bad maintenance
Conclusion
While Starlink’s prowess in the market is starting to show, we’re yet to see improvements in customer relations and installation services.
But before we see these changes, we hope this guide has shed light on how to mount the ground pole.
If you feel it’s too technical or hands-on, contact a professional to do the job.